Best Fine Toothed Wood Cutting Miter Saw Blade Reviews

You could be forgiven for thinking all miter saw blades are the same. Simply they are not.

In your daily DIY or professional life, you deal with many types of materials, and they all have different considerations that should be kept in heed when cut them.

We talk you through the best miter saw blades in each category and so that you lot get the results you lot deserve.

Image

Model

Product Comparison Table

Features

Best for Hardwood

Makita A-9368110 Miter Saw Blade

• Carbide-tipped blades
• Hook teeth
• Ultra-thin kerf

Best for Fine Woodworking

Freud D12100X100 ToothUltra

• Non-stick coating
• Carbide-tipped teeth
• Ultra-thin kerf

Best All-Purpose Miter Saw Blade

DeWALT Miter Saw Bract Set

• Perfect all-rounder
• Tungsten carbide-tipped
• Reckoner balanced

Best for Trim and 2x4

Forrest WW10407100 Woodworker II

• Perfect for trim
• Reduces wastage
• Ideal for veneer work

All-time Sliding Miter Saw Blade

Freud Thin Kerf Miter Saw Blade

• Non-stick blanket
• Atb tooth pattern
• Thin kerf

Best for PVC

Diablo D1080N Not-Ferrous Cutting Blade

• Non-stick blanket
• Triple-fleck grind
• Thin kerf

Best for Laminate Flooring

Bosch Edge DCB1072 Daredevil Blade

• Non-stick coating
• C4 carbide-tipped
• Triple-ground teeth

• Our Height Picks
• When Should I Replace My Miter Saw Blade?
• How Practise I Choose a Miter Saw Bract?
• The Best Miter Saw Blades of 2022
• Miter Saw Blade Comparison Chart
• How to Make clean and Maintain Your Miter Saw Blade
• How to Acuminate a Miter Saw Bract by Hand
• The Cutting Edge

---

When Should I Supercede My Miter Saw Blade?

Unfortunately, there is no exact answer. Miter saw blades don't take indicator lights that tell you when you should change them. So it comes downwardly to experience and blade manufacturer recommendations.

The first thing is to read the operating manual. This volition indicate the frequency of blade changes. Next, consider what you are sawing. If you are chopping through softwood, the blade will last longer. If yous are cutting sheet metal or hardwood, information technology has a greater impact on the condition of the blade.

The tertiary consideration is the quality of the saw blade. What material is it? Carbon steel varieties dull faster than those made from cobalt steel or carbide-tipped tungsten.

The fourth factor is how well the saw cuts. If you've noticed that tasks take longer to complete, it is a sign that your saw blade is dull.

And finally, it depends how many times you lot use the saw. If you use information technology every day, expect to change the blade every two weeks to a calendar month. All the same, if you are using your miter saw infrequently, that aforementioned bract could last you for years.

How Do I Choose a Miter Saw Blade?

Ownership the right miter saw bract is crucial for the all-time outcomes in your projects. Then, here is a handy guide to help you.

---

The Best Miter Saw Blades of 2022

With so many miter saw blades to choose from, we reviewed dozens of varieties to help yous go far at the right selection for your miter saw and project.

1. Makita A-9368110-Inch Miter Saw Blade

Best Miter Saw Blade for Hardwood

This Makita is a 10-inch blade, so information technology is slightly smaller than some on the list. It means information technology will decrease the depth that you can cutting, just if you intend on sawing through thinner material, this won't be a trouble.

The 80 carbide teeth are honed using 600 grit to provide a mirror finish. The ultra-sparse kerf means you get a smoother cut with less drag on the motor, and less material wastage. Plus, the teeth are claw teeth with a 5-degree angle, with an alternative pinnacle and face design for precision cutting.

The other advantage of hook teeth is that they scoop the debris and sawdust away. This reduces the chances of the blade gumming, which creates kickback. It likewise means yous get a better sightline when you are cut.

The only downside to this blade is the cost. It is a Bosch, so we know it isn't going to be cheap, simply other manufacturers offer packs of blades for similar prices. That said, this saw blade slices through hardwood, softwood and plyboard with ease and is a quality product.

Pros

• Carbide-tipped blades.
• Hook teeth.
• Ultra-sparse kerf.
• Fine crosscutting.

Additional Specs

Kerf	Ultra-thin
Number of teeth	80
Max RPM	5,870
Suitable for	Hardwood, softwood, plyboard
Weight	5 pounds
Size	10 inches
Price	$$

---

2. Freud D12100X100 ToothUltra Fine Saw Blade

Best Miter Saw Blade for Fine Woodworking

This Freud Diablo blade fits 12-inch miter saws, so you can make deeper cuts when compared to the Makita. This bract besides has 100 teeth, and an ultra-fine laser-cut kerf that delivers the finest cutting lines.

Information technology increases your range of accuracy and precision and is the ideal blade to use for fine woodworking. Like the Makita, this blade has carbide-tipped teeth that resist heat and avoid dulling.

Freud has laser-cut stabilizer vents to forestall sideways movement and subtract vibration and noise. It all adds up to a better saw feel giving you greater command and accuracy.

Likewise, the surface is coated in a Perma-Shield non-stick layer to ensure the bract glides through the textile with minimum resistance. This glide-ability, in plow, decreases the strain on your miter saw motor.

Pros

• Non-stick coating.
• 12 inches.
• Carbide-tipped teeth.
• 100 teeth.
• Ultra-thin kerf.

Cons

• The cost.
• Suited to fine woodworking.

Additional Specs

Kerf	Ultra-thin
Number of teeth	100
Max RPM	six,000
Suitable for	Forest, wood composites
Weight	2.54 pounds
Size	12 inches
Cost	$$

---

three. DeWALT 10-Inch General-Purpose Miter Saw Blade Set

All-time All-Purpose Miter Saw Bract

This DeWALT miter saw blade comes every bit a set of two. 1 has 60 teeth and is improve for crosscutting, but the other is a general-purpose saw bract with 32 teeth. These blades are for ten-inch miter saws, and they have carbide-tipped teeth to increase their oestrus resistance and durability.

These blades are half the price of the Freud and Makita models, and yet you go the DeWALT brand proper name and two saw blades in for the bargain. The 32-tooth bract is the best saw bract for tackling almost all your cutting tasks. It cuts wood, composite, plastic, sail metal, and ply.

These DeWALT blades are figurer counterbalanced to reduce vibration, racket and ameliorate accuracy for a better finish. If you have a sliding miter saw, these blades also fit, and thanks to their sparse kerf, you get a precise cut every fourth dimension.

Pros

• Great price.
• Come as a pack of two.
• Perfect all-rounder.
• Tungsten carbide-tipped.
• Estimator balanced.

Cons

• Material quality issues.

Boosted Specs

Kerf	Thin
Number of teeth	32 + 60
Max RPM	6,000
Suitable for	General-purpose
Weight	iii pounds
Size	ten inches
Cost	$

---

4. Forrest WW10407100 Woodworker Ii 40-Tooth Saw Blade

Best Miter Saw Blade for Trim and 2x4

Forrest is the ultimate in quality. For that reason, while this is the Rolls-Royce of miter saw blades, it costs a small fortune. It is likely that unless you are a serious woodworker, this blade will find a home in the miter saw of a professional or tradesperson.

This blade costs near as much equally some budget miter saws!

Despite its 10-inch bore, this blade slices to a maximum depth of two inches, which means it will handle cutting 2×iv with ease. The teeth are carbide-tipped, set at an angle of 15 degrees, and well-equipped to reduce the top and bottom splintering.

The kerf is thin and reduces wood wastage by 20 pct and leaves an border so smooth you'd think it was reworked.

Pros

• High quality.
• Perfect for trim.
• Reduces wastage.
• Reduces top and bottom splintering.
• Ideal for veneer work.

Cons

• Expensive.
• Probable to entreatment to professionals.

Additional Specs

Kerf	Thin
Number of teeth	xl
Max RPM	half-dozen,000
Suitable for	General-purpose, trim, crosscutting, wood
Weight	two pounds
Size	10 inches
Cost	$$$$

---

5. Freud Thin Kerf Sliding Compound Miter Saw Blade

Best Sliding Miter Saw Bract

This Freud blade has 72 teeth with a v-degree negative claw, which improves the quality of the cutting. They also use the alternating peak bevel pattern (ATB), meaning the teeth face left and correct. This configuration pushes your workpiece down and towards the contend for better command and accuracy.

This blade increases the operation of sliding miter saws, but it is also effective in standard saws when you want to perform crosscuts, rip cuts and bevel cuts. The teeth are carbide-tipped for increased resistance to estrus and for a longer life, and the kerf is thin, then making detailed cuts on your sliding saw will be easy.

A thin kerf also means at that place is less strain on the saw's motor.

Like the other Freud blades featured on the listing, this one is as well coated in a Perma-Shield not-stick surface to increase the blade'due south lubrication equally it passes through the stock.

Pros

• Non-stick coating.
• ATB tooth blueprint.
• Thin kerf.
• 72 teeth.
• Designed for sliding miter saws.

Cons

• Expensive.
• Build quality issues.

Additional Specs

Kerf	Thin
Number of teeth	72
Max RPM	six,000
Suitable for	Sliding miter saws, general-purpose, trim, crosscutting, woods
Weight	2.42 pounds
Size	12 inches
Cost	$$$

---

6. Diablo D1080N Non-Ferrous Metal and Plastic Cutting Saw Blade

Best Miter Saw Blade for PVC

And then, we characteristic another Diablo blade, merely this one cuts non-ferrous metals and plastics. It'southward why we chose it as our best saw blade for PVC. This blade is 10 inches in diameter and has 80 carbide-tipped teeth. Those teeth are the triple-scrap grind design with a five-degree angle, and then they leave a clean and burr-gratis finish.

This blade likewise cuts laminate, aluminum and brass, also every bit pipework. Then if you are working on-site, information technology will cater to many applications. It has a thin kerf, and so it volition leave a smooth cutting and put minimal strain on the miter saw motor.

If y'all are worried about gumming and the increased run a risk of kickback, this blade glides effortlessly through the stock thanks to the Perma-Shield non-stick coating. Again, this decreases the pressure on the saw motor.

The teeth are carbide-tipped to enable them to withstand extreme heat during the cut procedure and to protect the blades from dulling.

Pros

• Non-stick blanket.
• 80 teeth.
• Triple-chip grind.
• Thin kerf.
• Ideal for plastic and non-ferrous metal.

Cons

• Expensive.
• Build quality problems.

Additional Specs

Kerf	Thin
Number of teeth	fourscore
Max RPM	vii,000
Suitable for	Plastic, brass, pipework, non-ferrous metals
Weight	i.45 pounds
Size	x inches
Cost	$$$

---

7. Bosch Edge DCB1072 Daredevil x-Inch Laminate Saw Blade

All-time Miter Saw Blade for Laminate Flooring

This is the second Bosch blade to feature, and this one cuts laminate flooring similar a demon. It has 72 teeth with a negative hook angle to eliminate chipping and extend the blade's life.

Laminate is notoriously breakable, which is why Bosch has triple-ground the teeth for extra sharpness to increment the quality of the finish.

The teeth are tipped in C4 carbide to enhance their cut prowess and longevity. We like that the blades are anti-friction, coated for a smooth passage through the stock. Couple that with the thin kerf, and you get a smoother cutting with less waste.

When you lot are done laying the laminate, this blade will cut melamine, wood, plyboard and other building materials, making this the ideal blade to have in your professional gear up.

Pros

• Non-stick coating.
• C4 carbide-tipped.
• Triple-footing teeth.
• Thin kerf.
• Perfect for cutting laminate.

Additional Specs

Kerf	Sparse
Number of teeth	72
Max RPM	6,000
Suitable for	Laminate, melamine, wood, plyboard
Weight	one.65 pounds
Size	10 inches
Cost	$$$

---

Miter Saw Blade Comparison Chart

Production	Best	Kerf	No. of teeth	Max RPM	Suitable for	Weight	Size
Makita A-9368110 Miter Saw Blade	Hardwood	Ultra-thin	fourscore	5,870	Hardwood, softwood, plyboard	v lbs	x″
Freud D12100X100 ToothUltra	Fine Woodworking	Ultra-thin	100	6,000	Woods, wood composites	2.54 lbs	12″
DeWALT Miter Saw Blade Prepare	All-Purpose	Thin	32 + 60	6,000	Full general-purpose	3 lbs	ten″
Forrest WW10407100 Woodworker	Trim & ii×4	Sparse	40	6,000	General-purpose, trim, crosscutting, wood	2 lbs	10″
Freud Thin Kerf Miter Saw Bract	Sliding Bract	Thin	72	6,000	Sliding miter saws, general-purpose, trim, crosscutting, wood	2.42 lbs	12″
Diablo D1080N Non-Ferrous Blade	PVC	Thin	80	7,000	Plastic, brass, pipework, not-ferrous metals	one.45 lbs	10″
Bosch Edge DCB1072 Daredevil	Laminate Flooring	Thin	72	6,000	Laminate, melamine, forest, plyboard	one.65 lbs	x″

---

How to Make clean and Maintain Your Miter Saw Blade

If you want to get the maximum use from your miter saw blade, y'all will demand to make clean it from time to time to maintain it.

1. Place the blade in water: Once you lot have removed the blade from the saw, take some all-purpose cleaner and dilute information technology in warm water in a washing-up basin. Place the bract in the water and immerse it. Exit it to soak for a few minutes to allow the detergent to do its work.
2. Scrub: Remove the blade carefully and scrub away whatever stubborn areas with a toothbrush. Immerse it back in the h2o, taking care to grip the bract past the centre hole and give it a shake in the h2o to wash away any final bits of droppings.
3. Dry out: Lift the bract from the water and dry it thoroughly with a fabric.

You could likewise make sure that subsequently each utilize, you take a brush and wipe the surface of the saw blade. This sweeps away any loose debris that may become compacted and cause damage. And i of the best ways to maintain your saw and blade is to utilize oil and lubricant on the moving parts that require information technology to keep them working smoothly.

Elevation Tip

Some people use citrus products to keep their blades shiny and clean.

How to Sharpen a Miter Saw Bract past Mitt

Y'all can use a power tool to do this, which would be much quicker. Notwithstanding, sharpening a saw blade just takes most twenty minutes at the near, fifty-fifty when you are using a file.

1. Unplug the Saw

Earlier you exercise anything, brand certain the saw is unplugged and switched off. Never endeavour to remove the blade with the machine plugged in.

ii. Loosen the Wrench

Many miter saws have a fastening wrench. Simply loosen this to remove the bract.

three. Remove the Bract

Carefully remove the blade. Take a marking pen and mark the blade at the bespeak where yous intend to offset sharpening. Now clamp the blade in a vice, making sure the teeth are free.

4. Catch a File

Catch a triangular file. The teeth are set at a specific angle, so brand certain yous don't deviate from this. Place the file on the kickoff point where y'all marked on the bract with the pen.

5. Zig-Zag the File

Run the file to lucifer the same bending of the teeth and work in a zig-zag manner, working backward and frontward four times. At present skip the side by side tooth and repeat the process for every other tooth.

6. Flip the Blade

Once all the mode round, flip the bract and start working in the same manner on the teeth that face up the other manner, working towards your marker.

7. Clean Up the Blade

Remove the blade and give it a clean with some soapy water. Brand certain the blade is completely dry earlier inserting it back into the saw.

---

The Cutting Border

Miter saws are versatile tools, but when y'all factor in the correct blade for the task, yous amend your results enormously. The design of the teeth, the angle and the fashion the teeth are sharpened all make a divergence to the outcome of your project.

Think about the material yous are working with and how it behaves when you are sawing. Is it brittle, does it splinter? Choosing the right blade is crucial if you want your project to expect like it was completed by a professional.

nerlicasim1987.blogspot.com

Source: https://sensibledigs.com/miter-saw-blades/

Share this post